heat resistance的例句大全

It relates to technical progress of silicone agent resistance to heat both at home and abroad.

综述国内外耐热硅橡胶粘合剂的技术进展情况.

Comparing PAM gelling agents, CHJ has a significantly improved heat resistance and retarding performance, especially in high temperature condition.

与PAM稠化剂相比，CHJ稠化剂的耐温和缓速性能有明显提高，尤其在高温条件下。

Strips made with this procedure had no increased moist-heat, dry-heat, or ethylene oxide resistance.

按此操作制作的纸带不会增加对湿热 、 干热和环氧乙烷的耐受性.

The heat transfer of ground heat exchanger is enhanced by changing backfill materials for reducing the thermal resistance of borehole and controlling heat pump operation mode for delaying the soil temperature rise speed.

本文通过改变回填材料减小钻孔内热阻和控制热泵运行模式延迟土壤温升来强化埋管换热器的传热，提高系统运行效率。

This can, for example, lead to antibiotic resistance but also heat or acid resistance.

例如可以导致它不但具有抗生素抗性而且具有抗热和抗酸性.

Production enjoys such advantages as good cushioning effect , shock resistance, heat-sealing performance, corrosion resistance, etc.

●制品具有减震性 、 冲击性 、 合性 、 腐蚀性 、 直观包装物的形态等优点.

P 84-polyimide: incinerators, high resistance to heat, high resistance to acids, low pressure drop, good dust cleaning.

聚酰亚胺: 焚化炉;高抗热性, 强耐酸性, 低压降, 易清理.

High thermal conductivity fire resistance , heat shock resistance, low expansion, inoxidizable , unattackable, anti-abrasive.

高导热率, 耐高温, 抗热震, 低膨胀, 抗氧化, 耐侵蚀,耐磨损.

"Method of producing of paint films for testing heat and humidity resistance, salt-fog resistance and accelerated weathering"

GB/T1765-1979测定耐湿热、耐盐雾、耐侯性（人工加速）的漆膜制备法

Ceramics tile are widely used because they have many good characteristics sue has heat-resistance, abrasion hardness, wear-resistance, acid-proof, low-expansion and low-price.

陶瓷玻化砖具有耐高温、高硬度、耐磨损、耐腐蚀、低膨胀系数、价格便宜等特点，因而其用途非常广泛。

It is found that heat transfer coefficient increases with fin height, while flow resistance varies as concave curve, that is to say, the resistance reaches the lowest value at a middle fin height.

结果表明，随着流道内翅片高度的增大，传热膜系数随之增大，但流阻曲线则呈凹型变化，即在中间高度时流阻达到一最小值。

Sandstone in acidic diagenetic enviroment has such characteristic as fast compaction rate, earlier compaction stage, prevalent grain solution and crushing, poor heat resistance and crushing resistance, small free growing space of authigenic mineral, poor reservoir properties and so on.

偏酸性成岩环境砂岩具有快速压实阶段较早、颗粒溶蚀一压碎现象普遍而抗热性和抗压性差、自生矿物的自由生长空间较小以及储集性质较差等特点。

According to the different industries, the requirements for epoxy curing agents are not the same. Excellent performance of the epoxy curing agent can make the cured product has good stability, high heat resistance and corrosion resistance effect.

根据各行业的不同需求，对环氧树脂固化剂的要求也不尽相同。性能优良的环氧树脂固化剂可以使得固化产物具有稳定性好、耐热性高、抗腐蚀效果好等特点。

Then, the effects of heat treatment and temperature on the chemical composition and sheet resistance of the prepared films were investigated by XRD, EDXS and sheet resistance measurements.

利用X射线衍射和能量散射X射线能谱表征方法，并结合薄膜方块电阻的测定，探讨了热处理方式和热处理温度对薄膜化学组成及薄膜电阻的影响。

The main heat resistance of heat transfer process in condenser lies in steam side.

凝汽器传热过程的主要热阻产生在汽侧.

The color difference data under heat condition show the color filter has good heat resistance.

彩色滤色膜在加热条件下的色差数据说明其符合耐热性的要求.

Clear, low viscosity, one-component , rigid, heat cure epoxy system which exhibits high heat resistance.

透明的低粘度 单组分 加热固化环氧树脂, 坚硬, 高抗热性.

Therefore, In allowing water resistance range, Parallel-flow heat exchanger can improve heat transfer efficiency and will be better choice for surface cooler in dry conditions through the reasonable multipaths designed.

因此，在允许水阻范围内，通过合理多流程设计，平行流换热器用于干工况作表冷器可以实现强化换热。

Characters and main use: Light weighted , flexible , good low temperature resistance, air tightness and heat welt.

特点及主要用途: 迷彩印花,织物结构比较轻、薄, 具有优异的耐低温性 、 气密性、高周波焊接性.

The model of heat transfer is put forward through analyzing thermal resistance network ofgravitate heat pipe.

本文通过分析重力热管的热阻网络,提出了重力热管的传热模型.